HI-8200H Datasheet, PDF (1/9 Pages) Holt Integrated Circuits – Quad 10 Ohm 12V outside-the-rails

August 2013
HI-8200H, HI-8201H, HI-8202H
Quad 10 Ohm +/-12V outside-the-rails
Analog Switch with
High Operating Temperature
GENERAL DESCRIPTION
The HI-8200H family are quad analog CMOS switches fabri-
cated with Silicon-on-Insulator (SOI) technology for latch-up
free operation and maximum switch isolation. They are opti-
mized for use in high temperature avionics applications. The de-
vices are capable of operating at extended temperature ranges
of -55°C to 175°C for plastic packages and -55°C to 200°C for
the ceramic CERDIP-16 package. High voltage gate drive is en-
tirely created on-chip enabling +/-12V switching range from a
single 3.3V or 5V supply. These switches are ideally suited for
applications demanding low switch leakage when the power
pins are 0V.
At 25°C and with VDD from 3.0V to 5.5V, the switch resistance
(RON) is typically 8W. RON is independent of VDD. In a switch-
ing range of -5V to +5V, the maximum deviation of RON from
flat is less than 5%.
These switches conduct equally well in either direction. Power
down and Off state leakages are less than 10nA maximum.
Charge injection is less than 10pC. Switching times are typi-
cally 180ns to the On state and 60ns to the Off state. The on-
board charge pump allows an On/Off cycle time of 5KHz for all
four switches simultaneously before the switching range be-
comes restricted.
The HI-8200H provides four each normally open switches
when the switch control inputs are low. The HI-8201H provides
four each normally closed switches when the switch control in-
puts are low. The HI-8202H provides a combination of two nor-
mally closed and two normally open switches.
APPLICATIONS
· Down-hole drilling and oil exploration
· High temperature avionics
· Data bus isolation
· Sample-and-Hold circuits
· Test Equipment
· Communications Systems
FEATURES
· Extended Temperature Ranges
·-55°C to 175°C (plastic packages)
·-55°C to 200°C (ceramic CERDIP-16 package)
· CMOS analog switches with up to +/-12V switching range
from a single 3.3V or 5V supply
· Low RON: 10W max at 25°C
· Robust CMOS Silicon-on-Insulator (SOI) technology
· Switch nodes are open-circuit when chip is powered down
· SOI switch isolation with 1nA typical Off leakage
· ESD protection > 4KV HBM
· Fast switching time with break-before-make
· Low power
PIN CONFIGURATIONS (Top Views)
IN1 1
S1A 2
-3
S1B 4
V- 5
GND 6
S4B 7
-8
S4A 9
IN4 10
20 IN2
19 S2A
18 -
17 S2B
16 V+
15 VLOGIC
14 S3B
13 -
12 S3A
11 IN3
HI-8200PSHF
20-Pin TSSOP package
PRODUCT OPTIONS
PART TYPE IN1 Switch 1 IN2 Switch 2 IN3 Switch 3 IN4 Switch 4
HI-8200H 0 Open 0 Open 0 Open 0 Open
1 Closed 1 Closed 1 Closed 1 Closed
HI-8201H 0 Closed 0 Closed 0 Closed 0 Closed
1 Open 1 Open 1 Open 1 Open
HI-8202H 0 Open 0 Closed 0 Closed 0 Open
1 Closed 1 Open 1 Open 1 Closed
(DS8200H Rev. New)
HOLT INTEGRATED CIRCUITS
www.holtic.com
08/13