HI-8190H Datasheet, PDF (1/9 Pages) Holt Integrated Circuits – 12, Quad, SPST, 3.3V / 5.0V compatible

July 2013
HI-8190H, HI-8191H, HI-8192H
12W, Quad, SPST, 3.3V / 5.0V compatible
Analog Switch with High Operating Temperature
GENERAL DESCRIPTION
The HI-8190H family are quad analog CMOS switches fabri-
cated with Silicon-on-Insulator (SOI) technology for latch-up
free operation and maximum switch isolation. They are opti-
mized for use in high temperature avionics applications. The de-
vices are capable of operating at extended temperature ranges
of -55°C to 175°C for plastic packages and -55°C to 200°C for
the ceramic CERDIP-16 package.
The switch voltages can range from bipolar ± 3.3V to ± 15V or
single ended from 3.3V to 15V. The logic supply can range from
3.3V to 5.0V. The HI-8190H provides four each normally open
switches when the switch control inputs are Low. The HI-8191H
provides four each normally closed switches when the switch
control inputs are Low. The HI-8192H provides a combination
of two normally On and two normally Off switches. The limits of
the operating range are defined by the V+/V- bias voltage (rail-
to-rail switching capability).
On-resistance of each switch depends upon only the VLOGIC
selection. At 5V, RON ranges from 10W to 17W while at 3.3V sup-
ply RON ranges from 10W to 22W. Each switch is designed using
back to back high voltage transistors. Switch transistors are
symmetrical and conduct equally well in either direction. Signal
range can run the full rails. Off leakages are very low (1 nA typi-
cal) and charge injection is less than 3 pC. Switch ESD toler-
ance is greater than 4 KV.
The Off state is achieved first before any On condition is ap-
plied. Switching times with a 3.3V VLOGIC supply are typically
35 ns to the On state and 20 ns to the Off state.
FEATURES
· Extended Temperature Ranges
· -55°C to 175°C (plastic packages)
· -55°C to 200°C (ceramic CERDIP-16 package)
· ± 3.3V to ± 15V CMOS analog switches
· Low RON: 12 W to 15 W typical
· Robust CMOS Silicon-on-Insulator (SOI) technology
· SOI switch isolation with 1nA typical Off leakage
· Superior ESD protection > 4KV HBM
· Fast switching time with break-before-make
· Low power
PIN CONFIGURATIONS (Top Views)
IN1 1
S1A 2
S1B 3
V- 4
GND 5
S4B 6
S4A 7
IN4 8
16 IN2
15 S2A
14 S2B
13 V+
12 VLOGIC
11 S3B
10 S3A
9 IN3
HI-8190PSH, 16-Pin SOIC
APPLICATIONS
· Down-hole drilling and oil exploration
· High temperature avionics
· Data bus isolation
· Data Acquisition Systems
· Engine controllers (FADEC)
PRODUCT OPTIONS
PART TYPE IN1 Switch 1 IN2 Switch 2 IN3 Switch 3 IN4 Switch 4
HI-8190H 0 Open 0 Open 0 Open 0 Open
1 Closed 1 Closed 1 Closed 1 Closed
HI-8191H 0 Closed 0 Closed 0 Closed 0 Closed
1 Open 1 Open 1 Open 1 Open
HI-8192H 0 Open 0 Closed 0 Closed 0 Open
1 Closed 1 Open 1 Open 1 Closed
(DS8190H Rev. New)
HOLT INTEGRATED CIRCUITS
www.holtic.com
07/13