HI-2130_16 Datasheet, PDF (1/10 Pages) Holt Integrated Circuits – 3.3V BC / MT / RT with Integrated Transformers

October 2016
HI-2130
Single Package MIL-STD-1553 / MIL-STD-1760
3.3V BC / MT / RT with Integrated Transformers
GENERAL DESCRIPTION
The HI-2130 provides a 3.3V fully integrated interface
between a host processor and a MIL-STD-1553 /
MIL-STD-1760 bus. It combines the functionality of Holt’s
HI-6130 16-bit parallel bus interface and HI-6131 SPI
devices, integrating MIL-STD-1553 protocol logic, dual
transceivers and dual transformers in a single compact
15 x 15 x 4.4 mm package; the smallest 1553 terminal
solution with integrated magnetics in a single package.
Both RoHS compliant and Sn/Pb configurations are
available, giving customers a solution for tin-lead
assemblies while avoiding expensive re-balling.
The device includes the entire signal I/O set of HI-6130
and HI-6131, with the addition of a new input signal for
selecting parallel bus or SPI host interface. Two pairs
of transformer output signals connect directly to the
MIL-STD-1553 Bus A and Bus B stubs.
The part is available in Industrial -40^oC to +85^oC, or
Extended, -55^oC to +125^oC temperature ranges.
Refer to the HI-6130 datasheet for full functional
description and operation.
64K Byte
Shared RAM
BC RT
RT MT
MIL-STD-1553 Protocol &
Memory Management
External Serial
Flash EEPROM
Interface
HI-2130
Transformers
Transceiver
A
Transceiver
B
FEATURES
• Combined functionality of HI-6130 and HI-6131
in a single package with integrated transformers
• Smallest footprint MIL-STD-1553 solution
available (includes transformers)
• Low profile package solution suitable for PMC
and XMC applications
• Extended temperature range, -55ºC to +125ºC
• Hermetically sealed die option (MSL 1) available
• Less expensive than traditional multi-chip
modules
• DO-254 certifiable
• Concurrent multi-terminal operation (BC, MT, 1 or
2 independent RTs)
• Two host interface options in one package: 16-bit
parallel bus or 4-wire SPI
• 64K bytes on-chip RAM with error detection/
correction option
• Autonomous terminal operation requires minimal
host intervention
• Shared MIL-STD-1553 bus interface reduces
circuit complexity and circuit board area.
• Fully programmable Bus Controller with 28 op
code instruction set
• Simple Monitor Terminal (SMT) Mode records
commands and data separately, with 16-bit or
48-bit time tagging
• IRIG Monitor Terminal (IMT) Mode supports
IRIG-106 Chapter 10 packet format. Complete
IRIG-106 data packets including full packet
headers and trailers can be generated
• Independent time-tag counters for all terminals
with 32-bit option for Bus Controller and 48-bit
option for Monitor Terminal
• 64-Word Interrupt Log Buffer queues the most
recent 32 interrupts. Hardware-assisted interrupt
decoding quickly identifies interrupt sources
• Built-in self-test for protocol logic, digital signal
paths and internal RAM
• Optional self-initialization at reset uses external
serial EEPROM
• Two temperature ranges: -40^oC to +85^oC, or
-55^oC to +125^oC
DS2130 Rev. H
HOLT INTEGRATED CIRCUITS
www.holtic.com
1
10/16