HI-1584 Datasheet, PDF (1/10 Pages) Holt Integrated Circuits – 3.3V Monolithic Dual Transceiver

December 2015
HI-1584
MIL-STD-1553 / 1760
3.3V Monolithic Dual Transceiver
DESCRIPTION
The HI-1584 is an ultra-low power CMOS dual transceiver
designed to meet the requirements of the MIL-STD-1553
and MIL-STD-1760 specifications.
The transmitter section of each bus takes complementary
CMOS / TTL Manchester II bi-phase data and converts it to
differential voltages suitable for driving the bus isolation
transformer. Separate transmitter inhibit control signals are
provided for each transmitter.
The receiver section of the each bus converts the 1553 bus
bi-phase analog signals to complementary CMOS / TTL
data suitable for input to a Manchester decoder. Each
receiver has a separate enable input, which forces the
receiver outputs to logic "0".
The HI-1584 is housed in a small-footprint, 7 x 7 mm 48-pin
plastic chip-scale package (QFN) and is a drop-in
replacement for the Data Device Corporation
BU-67401L0C0x-102 transceiver.
PIN CONFIGURATION
GND 1
GND 2
VDDB 3
VDDB 4
TXB 5
TXB 6
TXINHB 7
RXENB 8
RXB 9
RXB 10
GND 11
VDDB 12
1584PCI
1584PCT
1584PCM
36 GND
35 GND
34 VDDA
33 VDDA
32 TXA
31 TXA
30 TXINHA
29 RXENA
28 RXA
27 RXA
26 GND
25 VDDA
48 Pin Plastic 7mm x 7mm
Chip-Scale Package (QFN)
FEATURES
· Compliant to MIL-STD-1553A and B,
MIL-STD-1760 and ARINC 708A
· ^{3.3V single supply operation}
· ^{Smallest footprint available in 7mm x 7mm}
48 pin plastic chip-scale package (QFN)
· 0.5W maximum power dissipation
(100% duty cycle, single bus
transmitting)
· Industrial and extended temperature
ranges
· Drop-in alternative to BU-67401L0C0x-
102
APPLICATIONS
· ^{MIL-STD-1553 Terminals}
· ^{Flight Control and Monitoring}
· ^{Radar Systems}
· ^{ECCM Interfaces}
· ^{Stores Management}
· ^{Test Equipment}
· ^{Sensor Interfaces}
· ^{Instrumentation}
(DS1584 Rev. New)
HOLT INTEGRATED CIRCUITS
www.holtic.com
12/15