HI-15530 Datasheet, PDF (1/11 Pages) Holt Integrated Circuits – Manchester Encoder / Decoder

July 2001
HI-15530
Manchester Encoder / Decoder
GENERAL DESCRIPTION
The HI-15530 is a high performance CMOS integrated
circuit designed to meet the requirements of Mil-Std-1553
and similar Manchester II encoded, time division
multiplexed serial data protocols. The HI-15530 contains
both an Encoder and Decoder, which operate
independently.
The device generates Mil-Std-1553 sync pulses, parity bits
as well as the Manchester II encoding of the data bits. The
decoder recognizes and identifies sync pulses, decodes
data bits, and performs parity checking.
The HI-15530 supports the 1Mbit/s data rate of Mil-Std-
1553 over the full temperature and voltage range.
For applications requiring small footprints and low cost, the
HI-15530 is available in a 24-pin plastic SOIC package.
Ceramic DIP and LCC packages are also available to
achieve the highest level of reliability and to provide drop-in
replacement for obsolete parts from other manufacturers.
FEATURES
! Mil-Std-1553 compatible
! Interfaces to HI-1567 Transceiver
! Small footprint 24-pin plastic SOIC package
option
! Direct replacement for:
Harris HD15530
GEC Plessey Semiconductors MAS15530
Aeroflex ACT15530
! 1.25 Mbit/s Data Rate
! Manchester II Encode and Decode
! Sync identification and Lock-in
! Clock recovery
PIN CONFIGURATION (Top View)
APPLICATIONS
! Mil-Std-1553 Interfaces
! ARINC 708A Interfaces
! Smart Munitions
! Stores management
! Sensor interfaces
! Instrumentation
VALID WORD 1
ENCODER SHIFT CLK 2
TAKE DATA 3
SERIAL DATA OUT 4
DECODER CLK 5
BIPOLAR ZERO IN 6
BIPOLAR ONE IN 7
UNIPOLAR DATA IN 8
DECODER SHIFT CLK 9
COMMAND / DATA SYNC 10
DECODER RESET 11
GND 12
HI-15530PSI
24 VDD
23 ENCODER CLK
22 SEND CLK IN
21 SEND DATA
20 SYNC SELECT
19 ENCODER ENABLE
18 SERIAL DATA IN
17 BIPOLAR ONE OUT
16 OUTPUT INHIBIT
15 BIPOLAR ZERO OUT
14 ÷ 6 OUT
13 MASTER RESET
24 Pin SOIC package
(DS15530 Rev. A)
HOLT INTEGRATED CIRCUITS
07/01