HT83B60 Datasheet, PDF (66/84 Pages) Holtek Semiconductor Inc – Voice Mask MCU

HT83B60
Voice Mask MCU
Configuration Options
Configuration options refer to certain options within the MCU that are programmed into the device
during the programming process. During the development process, these options are selected using
the HT-IDE software development tools. As these options are programmed into the device using the
hardware programming tools, once they are selected they cannot be changed later by the application
software.
No.
Options
I/O Options
1
PA0~PA7: wake-up enable or disable
2
PA0~PA7: pull-high enable or disable
3
PB0~PB7: pull-high enable or disable
Oscillator Options
4
OSC type selection: ERC, crystal or HIRC
HIRC Options
5
HIRC option: 4MHz, 8MHz, 12MHz
Watchdog Options
6
WDT: enable or disable
7
WDT clock source: WDTOSC or T1
PB I/O Port Output Voltage Options
8
VDD_PBIO/VDD type selection: VDD_PBIO or VDD for Port B, SPI, I²C I/O per bit
LVR Option
9
LVR function: enable or disable
LVD Option
10 LVD function: enable or disable
Reset Options
11 Reset function: PC0 or reset pin
SIMA Options
12 SIMA Function: enable or disable
13 SPIA S/W CSEN: enable or disable
14 SPIA S/W WCOL: enable or disable
15 I²CA RNIC: enable or disable
16 I²CA debounce time: 0/1/2 system clocks
SIMB Options
17 SIMB Function: enable or disable
18 SPIB S/W CSEN: enable or disable
19 SPIB S/W WCOL: enable or disable
20 I²CB RNIC: enable or disable
21 I²CB debounce time: 0/1/2 system clocks
Rev. 1.00
66
December 19, 2011