HT49R50 Datasheet, PDF (39/59 Pages) Holtek Semiconductor Inc – 8-Bit Microcontroller

CPLA [m]
Description
Operation
Affected flag(s)
DAA [m]
Description
Operation
Affected flag(s)
DEC [m]
Description
Operation
Affected flag(s)
HT49R50
Complement data memory and place result in the accumulator
Each bit of the specified data memory is logically complemented (1 s comple-
ment). Bits which previously contained a one are changed to zero and
vice-versa. The complemented result is stored in the accumulator and the
contents of the data memory remain unchanged.
ACC ¬ [m]
TC2 TC1 TO PD OV Z AC C
¾ ¾¾¾¾ Ö ¾¾
Decimal-Adjust accumulator for addition
The accumulator value is adjusted to the BCD (Binary Code Decimal) code.
The accumulator is divided into two nibbles. Each nibble is adjusted to the
BCD code and an internal carry (AC1) will be done if the low nibble of the ac-
cumulator is greater than 9. The BCD adjustment is done by adding 6 to the
original value if the original value is greater than 9 or a carry (AC or C) is set;
otherwise the original value remains unchanged. The result is stored in the
data memory and only the carry flag (C) may be affected.
If ACC.3~ACC.0 >9 or AC=1
then [m].3~[m].0 ¬ (ACC.3~ACC.0)+6, AC1=AC
else [m].3~[m].0) ¬ (ACC.3~ACC.0), AC1=0
and
If ACC.7~ACC.4+AC1 >9 or C=1
then [m].7~[m].4 ¬ ACC.7~ACC.4+6+AC1,C=1
else [m].7~[m].4 ¬ ACC.7~ACC.4+AC1,C=C
TC2 TC1 TO PD OV Z AC C
¾ ¾ ¾ ¾ ¾ ¾ ¾¾
Decrement data memory
Data in the specified data memory is decremented by one.
[m] ¬ [m] 1
TC2 TC1 TO PD OV Z AC C
¾ ¾¾¾¾ Ö ¾¾
39
October 22, 1999