English
Language : 

HT82B60R Datasheet, PDF (1/70 Pages) Holtek Semiconductor Inc – I/O MCU with USB Interface
HT82B60R
I/O MCU with USB Interface
Features
· Operating voltage:
fSYS=6M/12MHz: 3.3V~5.5V
· Low voltage reset function
· 42 bidirectional I/O lines (max.)
· 8-bit programmable timer/event counter with
overflow interrupt
· 16-bit programmable timer/event counter and
overflow interrupts
· Watchdog Timer
· PS2 and USB modes supported
· USB 2.0 low speed function
· 4 endpoints supported -- endpoint 0 included
· 8192´16 program memory
· 216´8 data memory RAM
· Integrated 1.5kW resistor between V33O and
USBPDN pins for USB applications
· Fully integrated 6MHz or 12MHz oscillator
· All I/O pins have wake-up functions
· Power-down function and wake-up feature reduce
power consumption
· Serial Interface Module -- I2C and SPI functions
· 4 COM lines for LCD display driving
· External interrupt pin
· 8-level subroutine nesting
· Up to 0.33ms instruction cycle with 12MHz system
clock at VDD=5V
· Bit manipulation instruction
· 15-bit table read instruction
· 63 powerful instructions
· All instructions in one or two machine cycles
· 20/28/48-pin SSOP, 32-pin QFN and
48-pin LQFP packages
General Description
The HT82B60R is a high performance, RISC architec-
ture microcontroller device specifically designed for
multiple I/O control product applications.
The advantages of low power consumption, I/O flexibil-
ity, timer functions, integrated USB interface, serial in-
terfaces, LCD drive capability, power down and
wake-up functions, watchdog timer etc, make the de-
vice extremely suitable for use in computer peripheral
product applications as well as many other applications
such as industrial control, consumer products, subsys-
tem controllers, etc.
These wide range of functions, together with a fully inte-
grated 6MHz or 12MHz oscillator, ensure that products
can be implemented with a minimum of external compo-
nents and smaller circuit board areas, providing users
with the benefits of lower overall product costs.
Rev. 1.10
1
February 1, 2011