|
HT819D0 Datasheet, PDF (1/13 Pages) Holtek Semiconductor Inc – 4.2 Second LOG-PCM Speech | |||
|
HT819D0
4.2 Second LOG-PCM Speech
Features
⢠Operating voltage: 2.4V~5.0V
⢠Directly drives an external transistor
⢠Low standby current (1µA typ. for VDD=3V)
⢠Minimal external components
⢠252 words table ROM for key functions
⢠Programmable silence length and end-pulse
width (minimal end-pulse width is 330µs at a
6kHz sampling rate)
⢠4.2-second voice capacity
⢠Section options:
â Retriggerable
â Non-retriggerable
⢠FLAG1 options:
â End-pulse output
â 3HzB flash
â 6HzB flash
â Voice output indication
â Busy output
⢠FLAG2 options:
â 3Hz flash
â 6Hz flash
â Busy output
⢠Controllable volume
⢠6 keys
⢠Key options:
â Stop key: KEY6
â Random (only for KEY1)
â Sequential (only for KEY1)
â Repeat (for all KEYs)
â Key debounce time (for all KEYs): 700µs,
22ms, 45ms, 180ms (based on a 6kHz sam-
pling rate of)
â One shot (for all KEYs)
â Pull-high resistance (for all KEYs)
⢠Dice form or 16-pin DIP/SOP
Applications
⢠Toys
⢠Alarm clocks
⢠Public address system
General Description
The HT819D0 is a single chip LOG-PCM voice
synthesizer LSI with 4.2-second voice capacity
at a 6kHz sampling rate. The chip when trig-
gered drives a speaker through an external
transistor with a current switch D/A converter
output. Negligible current will be consumed in
the standby state.
The HT819D0 provides 6 key inputs and 2 pro-
grammable FLAG outputs. With a 2.4V~5.0V
power supply, a complete synthesized voice
playback system can be easily built with very
few external components.
⢠Alert and warning system
⢠Sound effect generators
The customerâs voice sources are recorded sec-
tion by section into an internal mask ROM. The
sectional playback arrangement instructions of
each key are stored in the table ROM. The key
features are also programmable. With such a
flexible structure, the HT819D0 is excellent for
versatile voice applications.
1
6th May â98
|
▷ |