|
HT815D0 Datasheet, PDF (1/15 Pages) Holtek Semiconductor Inc – 11.2-Second LOG-PCM Speech | |||
|
HT815D0
11.2-Second LOG-PCM Speech
Features
· Operating voltage: 2.4V~5.0V
· Directly drives an external transistor
· Low standby current (1mA typ. for VDD=3V)
· Minimal external components
· 508 words table ROM for key functions
· Programmable silence length and end-pulse
width (minimal end-pulse width is 330ms at a
6kHz sampling rate)
· 11.2-second voice capacity (based on a 6kHz
sampling rate)
· FLAG1 options
â End-pulse output
â 3HzB flash
â 6HzB flash
â Voice output indication
â Busy output
· FLAG2 options
â 3Hz flash
â 6Hz flash
â Busy output
Applications
· Leisure products
· Alarm clocks
· Public address system
General Description
The HT815D0 is a single chip LOG-PCM voice
synthesizer LSI with 11.2-second voice capacity
at 6kHz sampling rate. The chip when trig-
gered drives a speaker through an external
transistor with a current switch D/A converter
output. Negligible current will be consumed in
the standby state.
The HT815D0 provides 12 key inputs and 2 pro-
grammable FLAG outputs. With a 2.4V~5.0V
power supply, a complete synthesized voice
playback system can be easily built with very
few external components.
· Controllable volume
· 12 keys
· Key options
â Stop key: KEY12
â Random (only for KEY1)
â Sequential (only for KEY1)
â Repeat (for all KEYs)
â Key debounce time (for all KEYs): 700ms,
22ms, 45ms, 180ms (based on a sampling
rate of 6kHz)
â One shot (for all KEYs)
â Level-trigger
â Pull-high resistance (for all KEYs)
· Section options
â Retriggerable
â Non-retriggerable
· Dice form or 16/20/24-pin DIP,
20/24-pin SOP package
· Alert & warning system
· Sound effect generators
The customer¢s voice sources are recorded sec-
tion by section into an internal mask ROM. The
sectional playback arrangement instructions of
each key are stored in the table ROM. The key
features are also programmable. With such a
flexible structure, the HT815D0 is excellent for
versatile voice applications.
1
March 15, 2000
|
▷ |