English
Language : 

HT6P427A Datasheet, PDF (1/9 Pages) Holtek Semiconductor Inc – Learning RF Encoder with Crystal SOC
HT6P427A/HT6P437A
Learning RF Encoder with Crystal SOC
Features
• Operating voltage: 2.0V ~3.6V
• Average Operation Current
♦♦ 13mA @ VDD=3.0V, 12dBm, 315MHz
♦♦ 22mA @ VDD=3.0V, 16dBm, 315MHz
• Standby current: 1.0μA (Max.) @ VDD=3V
• Up to 4 data pins
• Provides 2 compound Data trigger pins
• Up to 224 address codes
• 8 bit time via 2 pin selection
• Integrated complete UHF transmitter
• Frequency range: 300MHz to 450MHz
• Supports ASK/OOK modulation
• 3 output power levels: 12dBm/14dBm/16dBm via
1 pin selection
• Minimal external components
• High noise immunity
• 16-Pin NSOP package
Applications
• Burglar alarm systems
• Smoke and fire alarm systems
• Personal alarm systems
• Car/Garage door controllers
• Home/office/car security systems
• Other remote control systems
General Description
The HT6P4x7A devices form a series of data encoders
which include fully integrated ASK transmitters for
remote control system applications. These highly
integrated chips are true “switch-in, antenna-out”
monolithic devices. They encode 24 or 28 bits of
information and then serially transmit the data out
on their PAOUT pin upon receipt of a transmission
enable (Data pins: D0~D3 or B0~B1) signal. They
encode address and data information into a coded
waveform suitable for modulation and transmission
using their integrated RF circuits. The devices offer
high performance in two areas: power level and
operating temperature. In terms of power level, the
devices are capable of delivering +16dBm into a 50W
load. This power level enables a small form factor
transmitter such as a key fob transmitter to operate
with a maximum distance. In terms of temperature,
they can operate from -40ºC to 85ºC with very little
frequency drift. They additionally offer exceptional
ease of use. One only needs a reference frequency
generated from an external crystal to create a
complete versatile transmitter.The devices are used
with ASK/OOK (Amplitude Shift Keying/On-Off
Keyed) UHF receiver types from wide-band super-
regenerative radios to narrow-band, high performance
super-heterodyne receivers.
Selection Table
Part No.
VDD
Addr. No.
Data No.
Compound
Data No.
Trig.
Frequency
Band
RF Type Package
HT6P427A 2.0V~3.6V
20
4
2
Data High 300~450MHz ASK TX 16NSOP
HT6P437A 2.0V~3.6V
24
4
2
Data High 300~450MHz ASK TX 16NSOP
Rev. 1.00
1
December 19, 2014