|
HT16L23 Datasheet, PDF (1/43 Pages) Holtek Semiconductor Inc – RAM Mapping 52*4 / 48*8 LCD Driver | |||
|
HT16L23
RAM Mapping 52*4 / 48*8 LCD Driver
Feature
ââ Logic operating voltage: 1.8V~5.5V
ââ LCD operating voltage (VLCD): 2.4V~6.0V
ââ Internal 32kHz RC oscillator
ââ Bias: 1/3 or 1/4; Duty: 1/4 or 1/8
ââ Internal LCD bias generation with voltage-follower
buffers
ââ External VLCD pin to supply LCD operating
voltage
ââ Integrated regulator to adjust LCD operating
voltage: 3.0V, 3.2V, 3.3V, 3.4V, 4.4V, 4.5V, 4.6V,
5.0V
ââ Integrated LED driver
ââ Support I2C or SPI 3-wire serial interface
controlled by IFS pin
ââ Four selectable LCD frame frequencies: 64Hz or
85.3Hz or 128Hz or 170.6Hz
ââ Up to 48Ã8 bits RAM for display data storage
ââ Display pixel:
ââ52Ã4 pixel: 52 segments and 4 commons
ââ48Ã8 pixel: 48 segments and 8 commons
ââ Support two driver output mode segment/LED on
SEG44~SEG51/LED7~LED0
ââ Versatile blinking modes: off, 0.5Hz, 1Hz, 2Hz
ââ R/W address auto increment
ââ Low power consumption
ââ Manufactured in silicon gate CMOS process
ââ Package type: 64LQFP package
Applications
ââ Leisure products
ââ Games
ââ Telephone display
ââ Audio combo display
ââ Video player display
ââ Kitchen appliance display
ââ Measurement equipment display
ââ Household appliance
ââ Consumer electronics
General Description
The HT16L23 device is a memory mapping and
multi-function LCD controller/driver. The display
segments of the device are 208 patterns (52 segments
and 4 commons) for 1/4 duty display or 384 patterns
(48 segments and 8 commons) for 1/8 duty display.
It can also support LED drive outputs on certain
segment pins. The software configuration feature of
the HT16L23 device makes it suitable for multiple
LCD applications including LCD modules and display
subsystems. The HT16L23 device communicates with
most microprocessors/microcontrollers via a two-wire
bidirectional I2C or a three-wire SPI interface.
Rev. 1.00
1
November 16, 2011
|
▷ |