HMC7229LS6 Datasheet, PDF (9/10 Pages) Hittite Microwave Corporation – GaAs pHEMT MMIC 1 WATT POWER AMPLIFIER With Power Detector, 37 - 40 GHz

Evaluation PCB
HMC7229LS6
v00.0513
GaAs pHEMT MMIC 1 WATT POWER AMPLIFIER
With Power Detector, 37 - 40 GHz
J2
OUT
R2
R1
VREF
VD6
J5VD1
+
C13
GND
GND
U1
C5
C2
VD5
VD2
J6
VDET
GND
VD3
VG1
C15
C16 _{VD4 GND}
VG2
600-00812-00-1
IN
J1
List of Materials for Evaluation PCB EV1HMC7229LS6 ^[1]
Item
J1 - J2
J5 - J6
C1 - C6
C7 - C12
C13 - C18
R1 - R2
Description
“K” Connector, SRI
DC Pin
100 pF Capacitor, 0402 Pkg.
10000 pF Capacitor, 0603 Pkg..
4.7 uF Capacitor, Case A Pkg.
40.2K Ohm Resistor, 0402 Pkg.
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
U1
PCB ^[2]
HMC7229LS6 Amplifier
600-00812-00 Evaluation Board
tite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
9
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]