HMC535LP4 Datasheet, PDF (9/10 Pages) Hittite Microwave Corporation – PHASE-LOCKED OSCILLATOR, 14.7 - 15.4 GHz

v00.0405
Evaluation PCB
HMC535LP4 / 535LP4E
PHASE-LOCKED OSCILLATOR,
14.7 - 15.4 GHz
9
The circuit board used in the final application should use RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads and backside ground paddle should be connected directly
to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top
and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation
circuit board shown is available from Hittite upon request.
9 - 164
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com