HMC899LP4E Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – FILTER - TUNABLE, BAND PASS SMT 18.5 - 37.0 GHz

Evaluation PCB
v00.0211
HMC899LP4E
FILTER - TUNABLE, BAND PASS SMT
18.5 - 37.0 GHz
3
List of Materials for Evaluation PCB 131087 ^[1]
Item
Description
J1, J2
Connector, 2.4 mm, 50 GHz Jack
J6, J8
DC Pin
C2
100 pF Capacitor, 0402 Pkg.
U1
PCB ^[2]
HMC899LP4E Filter - Tunable
130746 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 25FR
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohms impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
3-8