HMC817LP4E Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – SMT GaAs PHEMT DUAL CHANNEL LOW NOISE AMPLIFIER, 550 - 1200 MHz

Evaluation PCB
v00.1108
HMC817LP4E
SMT GaAs PHEMT DUAL CHANNEL
LOW NOISE AMPLIFIER, 550 - 1200 MHz
8
List of Material for Evaluation PCB 123193 ^[1]
Item
Description
J1 - J4
PCB Mount SMA RF Connector
J5, J6
2mm Vertical Molex 8 pos Connector
C5, C6
1000 pF Capacitor, 0603 Pkg.
C9, C10
0.47 μF Capacitor, 0603 Pkg..
C11, C12
10 kpF Capacitor, 0402 Pkg.
R1 - R4
0 Ohm Resistor, 0402 Pkg.
R5, R6 (Rbias 1, 2) 10K Resistor, 0402 Pkg.
L1, L2
15 nH Inductor, 0402 Pkg.
L5, L6
18 nH Inductor, 0603 Pkg.
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
U1
PCB ^[2]
HMC817LP4E Amplifier
122725 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
8 - 377