HMC718LP4 Datasheet, PDF (8/10 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC HIGH IP3 LOW NOISE AMPLIFIER, 0.6 - 1.4 GHz

HMC718LP4 / 718LP4E
v01.1008
GaAs PHEMT MMIC HIGH IP3
LOW NOISE AMPLIFIER, 0.6 - 1.4 GHz
Pin Descriptions
Pin Number
1, 3 - 5, 7 - 16,
18, 20, 22, 23
Function
N/C
Description
No connection necessary. These pins may be connected to
RF/DC ground without affecting performance.
Interface Schematic
7
2
RFIN
This pin is DC coupled
and matched to 50 Ohms.
6
RES
This pin is used to set the DC current of the amplifier by
selection of external bias resistor. See application circuit.
17
RFOUT
RF Output and DC BIAS for the second amplifier.
See Application Circuit for off-chip components.
19
RFIN2
This pin is DC coupled. An off-chip DC
blocking capacitor is required.
21
RFOUT1
This pin is matched to 50 Ohms.
24
Vdd
Power Supply Voltage for the first amplifier. Choke inductor
and bypass capacitors are required. See application circuit.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
7-8