HMC662LP3E_10 Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – 54 dB, LOGARITHMIC DETECTOR, 8 - 30 GHz

Evaluation PCB
v01.1010
HMC662LP3E
54 dB, LOGARITHMIC
DETECTOR, 8 - 30 GHz
11
List of Materials for Evaluation PCB 124133 ^[1]
Item
J1
J2
J3 - J5
C1, C2
C3, C4
C5
Description
K-Type Connector
SMA Connector
DC Pin
1 pF Capacitor, 0201 Pkg.
10 nF Capacitor, 0402 Pkg.
47 pF Capacitor, 0402 Pkg.
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
C6
4.7 µF Tantalum Capacitor, CASE A Pkg.
is available from Hittite upon request.
R1
0 Ω Resistor, 0201 Pkg.
R3, R4
0 Ω Resistor, 0402 Pkg.
U1
PCB ^[2]
HMC662LP3E Log Detector
124131 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
11 - 8