HMC629LP4 Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – 3 dB LSB GaAs MMIC 4-BIT DIGITAL ATTENUATOR, DC - 6 GHz

Evaluation PCB
HMC629LP4 / 629LP4E
v07.0410
3 dB LSB GaAs MMIC 4-BIT
DIGITAL ATTENUATOR, DC - 6 GHz
8
List of Materials for Evaluation PCB 118889 ^[1]
Item
J1, J2
J10, J12
J11
C1 - C2
C3
C4 - C8
R1 - R10
SW1
Description
PCB Mount SMA Connector
DC Pin
18 Pin DC Connector
100 pF, capacitor 0402 pkg
1000 pF, capacitor 0402 pkg
330 pF, capacitor 0402 pkg
100 kOhm Resistor, 0402 Pkg.
SPDT 4 Position DIP Switch
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
U1
HMC629LP4(E) Digital Attenuator
PCB ^[2]
118888 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
8-8