HMC600LP4 Datasheet, PDF (8/10 Pages) Hittite Microwave Corporation – 75 dB LOGARITHMIC DETECTOR / CONTROLLER 50 - 4000 MHz

Evaluation PCB
HMC600LP4 / 600LP4E
v01.0606
75 dB LOGARITHMIC
DETECTOR / CONTROLLER 50 - 4000 MHz
10
List of Materials for Evaluation PCB 115242 ^[1]
Item
J1 - J4
J5 - J8
C1, C2
C3, C4
R1, R2
Description
PC Mount SMA Connector
DC Pin
1000 pF Capacitor, 0402 Pkg.
0.1μF Capacitor, 0402 Pkg.
5.6Ω Resistor, 0603 Pkg.
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
R3-R5
0Ω Resistor, 0603 Pkg.
The evaluation circuit board shown is available from
U1
HMC600LP4 / HMC600LP4E
Logarithmic Detector / Controller
Hittite upon request.
PCB ^[2]
115244 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
10 - 9