HMC585MS8G_08 Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 400 - 650 MHz

Evaluation PCB
HMC585MS8G / 585MS8GE
v01.0907
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 400 - 650 MHz
9
List of Materials for Evaluation PCB 114445 ^[1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J4 - J5
DC Pin
C1
10,000 pF Chip Capacitor, 0603 Pkg.
U1
PCB ^[2]
HMC585MS8G / HMC585MS8GE Mixer
104813 Evaluation Board, 1.0” x 1.0”
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
9 - 363