HMC542LP4_09 Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL SERIAL CONTROL ATTENUATOR, DC - 3 GHz

Evaluation PCB
HMC542LP4 / 542LP4E
v03.0809
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
SERIAL CONTROL ATTENUATOR, DC - 3 GHz
5
List of Materials for Evaluation PCB 114399 ^[1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
14 Pin DC Connector
C1
1000 pF Capacitor, 0603 Pkg.
C2, C3
1000 pF Capacitor, 0402 Pkg.
C4 - C7
330 pF Capacitor, 0402 Pkg.
U1
HMC542LP4(E) Digital Attenuator
PCB ^[2]
114398 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and exposed paddle should
be connected directly to the ground plane similar
to that shown. A sufficient number of via holes
should be used to connect the top and bottom
ground planes. The evaluation circuit board shown
is available from Hittite upon request.
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
5 - 205