HMC485MS8G Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – HIGH IP3 GaAs MMIC MIXER with INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz

v00.0503
MICROWAVE CORPORATION
HMC485MS8G
HIGH IP3 GaAs MMIC MIXER with
INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz
Evaluation PCB
12
List of Material
Item
J1 - J3
J4 - J5
Description
PC Mount SMA RF Connector
DC Pin
C1
10,000 pF Chip Capacitor, 0603 Pkg.
U1
HMC485MS8G Mixer
PCB*
104813 Evaluation Board, 1.0” x 1.0”
* Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown. A
sufficient number of VIA holes should be used to con-
nect the top and bottom ground planes. The evalua-
tion circuit board shown is available from Hittite upon
request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com
12 - 277