HMC471MS8G_09 Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – SiGe HBT DUAL CHANNEL GAIN BLOCK MMIC AMPLIFIER, DC - 5 GHz

Evaluation PCB
v01.0605
HMC471MS8G / 471MS8GE
SiGe HBT DUAL CHANNEL GAIN
BLOCK MMIC AMPLIFIER, DC - 5 GHz
9
List of Materials for Evaluation PCB 109185 ^[1]
Item
J1 - J4
J5 - J8
L1, L2
C1, C8
C2, C7
C3, C6
C4, C5, C9, C10
R1, R2
U1
Description
PCB Mount SMA Connector
DC Pins
Inductor, 0402 Pkg.
2.2 μF Capacitor, Tantalum
1000 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
Capacitor, 0402 Pkg.
Resistor, 2010 Pkg.
HMC471MS8G / HMC471MS8GE
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
PCB ^[2]
109162 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
9 - 59