HMC469MS8G Datasheet, PDF (8/8 Pages) Hittite Microwave Corporation – SiGe HBT DUAL CHANNEL GAIN BLOCK MMIC AMPLIFIER, DC - 5.0 GHz

MICROWAVE CORPORATION
v00.0504
HMC469MS8G
SiGe HBT DUAL CHANNEL GAIN
BLOCK MMIC AMPLIFIER, DC - 5.0 GHz
Evaluation PCB
8
List of Materials for Evaluation PCB 109164*
Item
J1 - J4
J5 - J8
L1, L2
C1, C8
C2, C7
C3, C6
Description
PC Mount SMA Connector
DC Pins
Inductor, 0402 Pkg.
2.2 µF Capacitor, Tantalum
1000 pF Capacitor, 0402 Pkg.
100 pF Capacitor, 0402 Pkg.
The circuit board used in the final application should use
RF circuit design techniques. Signal lines should have
50 ohm impedance while the package ground leads and
package bottom should be connected directly to the
ground plane similar to that shown. A sufficient number of
VIA holes should be used to connect the top and bottom
ground planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
C4, C5, C9, C10
Capacitor, 0402 Pkg.
R1, R2
Resistor, 2010 Pkg.
U1
HMC469MS8G
PCB**
109162 Evaluation PCB
** Circuit Board Material: Rogers 4350
* Reference this number when ordering complete evaluation PCB.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order Online at www.hittite.com
8 - 313