HMC746LC3C Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – 13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE, w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY

HMC746LC3C
v02.0109
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Evaluation PCB
7
Item
J1
J2
J3
J4
J5
J6
J7
J8
J9
Description
AN
AP
BN
BP
DP
DN
GND
VR
Vcc
List of Materials for Evaluation PCB 122517 ^[1]
Item
J1 - J6
J7 - J9
Description
PCB Mount SMA RF Connectors
DC Pin
The circuit board used in the final application sho-
uld use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
JP1
Shorting Jumper
ground leads should be connected directly to the
C1, C2
4.7 μF Capacitor, Tantalum
ground plane similar to that shown. The exposed
C3 - C5
100 pF Capacitor, 0402 Pkg.
package base should be connected to GND. A suffi-
R2
10 Ohm Resistor, 0603 Pkg.
cient number of via holes should be used to connect
U1
HMC746LC3C
High Speed Logic, AND / NAND / OR / NOR
PCB ^[2]
122515 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
the top and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon
request.
[2] Circuit Board Material: Arlon 25FR
7 - 160
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com