HMC745LC3C_11 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – 13 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY

HMC745LC3C
v03.1010
13 Gbps, FAST RISE TIME XOR / XNOR GATE
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Evaluation PCB
3
Item
J1
J2
J3
J4
J5
J6
J7
J8
J9
Description
AN
AP
BP
BN
DN
DP
GND
VR
Vcc
List of Materials for Evaluation PCB 122517 ^[1]
Item
J1 - J6
J7 - J9
Description
PCB Mount SMA RF Connectors
DC Pin
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package gro-
JP1
Shorting Jumper
und leads should be connected directly to the
C1, C2
4.7 µF Capacitor, Tantalum
ground plane similar to that shown. The exposed
C3 - C5
100 pF Capacitor, 0402 Pkg.
package base should be connected to GND. A
R2
10 Ohm Resistor, 0603 Pkg.
sufficient number of via holes should be used to
U1
HMC745LC3C
High Speed Logic, XOR / XNOR
PCB ^[2]
122515 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
[2] Circuit Board Material: Arlon 25FR
3-7
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]