HMC728LC3C Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – 14 Gbps, 2:1 SELECTOR

Evaluation PCB
3
v04.1010
HMC728LC3C
14 Gbps, 2:1 SELECTOR
List of Materials for Evaluation PCB 122520 ^[1]
Item
J1 - J6
Description
PCB Mount SMA RF Connectors
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
J7, J9
DC Pin
have 50 Ohm impedance while the package gro-
C1
4.7 µF Capacitor, Tantalum
und leads should be connected directly to the
C5
100 pF Capacitor, 0402 Pkg.
ground plane similar to that shown. The exposed
U1
HMC728LC3C
High Speed Logic, 2:1 Selector
PCB ^[2]
122518 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
package base should be connected to GND. A
sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
3-7
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]