HMC721LC3C Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – 14 Gbps, FAST RISE TIME XOR / XNOR GATE w/ PROGRAMMABLE OUTPUT VOLTAGE

Evaluation PCB
3
HMC721LC3C
v03.1010
14 Gbps, FAST RISE TIME XOR / XNOR GATE
w/ PROGRAMMABLE OUTPUT VOLTAGE
List of Materials for Evaluation PCB 118777 ^[1]
Item
J1 - J6
Description
PCB Mount SMA RF Connectors
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
J7 - J9
DC Pin
have 50 Ohm impedance while the package gro-
JP1
0.1” Header with Shorting Jumper
und leads should be connected directly to the
C1, C2
100 pF Capacitor, 0402 Pkg.
ground plane similar to that shown. The exposed
C3, C4
4.7 μF Capacitor, Tantalum
package base should be connected to Vee. A suffi-
R1
10 Ohm Resistor, 0603 Pkg.
cient number of via holes should be used to connect
U1
HMC721LC3C
High Speed Logic, XOR / XNOR
PCB ^[2]
118775 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
the top and bottom ground planes. The evaluation
circuit board shown is available from Hittite upon
request. Install jumper on JP1 to short VR to GND
for normal operation.
3-7
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]