HMC710LC5 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q UPCONVERTER 16 - 21 GHz

v02.0109
HMC710LC5
GaAs MMIC I/Q UPCONVERTER
16 - 21 GHz
8
Pin Descriptions
Pin Number
1 - 5, 7, 8, 11,
16, 17, 19, 20,
22 - 28
Function
N/C
Description
No Connection required. These pins may be connected to
RF/DC ground without affecting performance.
Power supply voltage for x2 multiplier. See application
6
Vdd1
circuit for required external components.
9
10, 13, 15, 30, 32
LOIN
GND
This pin is AC coupled
and matched to 50 ohms.
These pins and package bottom must be
connected to RF/DC ground.
Gate control for RF amplifier, please follow “MMIC Amplifier
12
Vgg
Biasing Procedure” application note. See application circuit
for required external components
14
RFOUT
This pin is AC coupled
and matched to 50 ohms.
18, 21
Vdd2,
Vdd3
Power supply voltage for RF amplifier. See application
circuit for required external components.
29
IF1
Differential IF input pins. For applications not requiring
operation to DC, an off chip DC blocking capacitor should
be used. For operation to DC this pin must not source/sink
more than 3mA of current or part non function and possible
31
IF2
part failure will result.
Interface Schematic
8 - 290
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com