HMC706LC3C Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – 13 Gbps, NRZ-to-RZ CONVERTER, +3.3V SUPPLY

Evaluation PCB
3
v02.0709
HMC706LC3C
13 Gbps, NRZ-to-RZ CONVERTER,
+3.3V SUPPLY
3-7
List of Materials for Evaluation PCB 118372 ^[1]
Item
J1, J2, J9
J3 - J8
C1
Description
DC Pin
K Connector
10 pF Capacitor, 0402 Pkg.
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package gro-
und leads should be connected directly to the
C7
1 nF Capacitor, 0402 Pkg.
ground plane similar to that shown. The exposed
C8, C11
C9, C12
C10
R1 - R5
U1
100 nF Capacitor, 0603 Pkg.
4.7 µF Case A, Tantalum
100 pF Capacitor, 0402 Pkg.
0 Ohm Resistor, 0402 Pkg.
HMC706LC3C
High Speed Logic, NRZ to RZ Converter
package base should be connected to ground. A
sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
PCB ^[2]
118370 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR, FR4
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]