HMC681LP5 Datasheet, PDF (7/10 Pages) Hittite Microwave Corporation – 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - 1 GHz

HMC681LP5 / 681LP5E
v03.1010
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL VARIABLE
GAIN AMPLIFIER w/ SERIAL CONTROL, DC - 1 GHz
12
Absolute Maximum Ratings
RF Input Power ^[1] (At Max Gain
Setting)
-10.5 dBm (T = +85 °C)
Digital Inputs (Reset, Shift Clock,
Latch Enable & Serial Input)
-0.5 to Vdd +0.5V
Bias Voltage (Vdd)
5.5V
Collector Bias Voltage (Vcc)
5.5V
Channel/Junction Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 19.8 mW/°C above 85 °C) ^[1]
1.29 W
Thermal Resistance
50.8 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
[1] The Max RF Input Power Rating will increase by 0.5 dB for
every 0.5 dB reduction in gain to a maximum RF Input Power of
10 dBm.
Outline Drawing
Bias Voltage
Vdd (V)
+5
Vs (V)
+5
Idd (Typ.) (mA)
5
Is₁ (mA)
88
Is₂ (mA)
88
Control Voltage Table
State
Low
High
Vdd = +3V
0 to 0.5V @ <1 µA
2 to 3V @ <1 µA
Vdd = +5V
0 to 0.8V @ <1 µA
2 to 5V @ <1 µA
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
12 - 7
Package Information
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number
HMC681LP5
Package Body Material
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
MSL Rating
MSL1 ^[1]
HMC681LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1 ^[2]
[1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX
Package Marking ^[3]
H681
XXXX
H681
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]