HMC630LP3 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – GaAs HBT VECTOR MODULATOR 700 - 1000 MHz

v00.1007
Evaluation PCB
HMC630LP3 / 630LP3E
GaAs HBT VECTOR
MODULATOR 700 - 1000 MHz
10
10 - 56
List of Materials for Evaluation PCB 117198 ^[1]
Item
J1 - J4
J5
C1
C2, C4, C5
C3 ^[3]
T1
L1
U1
Description
PCB Mount SMA Connector
2 mm DC Header
4.7 μF Capacitor, Tantalum
100 pF Capacitor, 0402 Pkg.
5 pF Capacitor, 0402 pkg
Balun, 0805 Pkg.
ANAREN BD0810J50100A
330 nH Inductor, 0805 Pkg.
HMC630LP3(E) Vector Modulator
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
PCB ^[2]
117196 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
[3] Locate close to HMC630LP3E package
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com