HMC597LP4_08 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – SiGe WIDEBAND DIRECT DEMODULATOR RFIC, 100 - 4000 MHz

Evaluation PCB
v03.0907
HMC597LP4 / 597LP4E
SiGe WIDEBAND DIRECT
DEMODULATOR RFIC, 100 - 4000 MHz
10
10 - 8
Evaluation PCB 115775 ^[1][2]
Item
Description
J1 - J6
PCB Mount SMA Connector
J7, J8
2 mm DC Header
C11, C20 - C24
1000 pF Capacitor, 0402 Pkg.
C12
100 pF Capacitor, 0402 Pkg.
C25
0.3 pF Capacitor, 0402 Pkg.
C26
0.9 pF Capacitor, 0402 Pkg.
C30 - C32
0.1 μF Capacitor, 0805 Pkg.
R3, R4
39.2 Ohm Resistor, 0402 Pkg.
R5
18.2 Ohm Resistor, 0402 Pkg.
L1 - L4
5.6 nH Inductor, 0402 Pkg.
T1, T2
2 - 800 MHz Balun
U1
PCB ^[2]
HMC597LP3 / HMC597LP3E
Direct Demodulator
116265 Evaluation PCB
[1] Reference this number when ordering complete evaluaiton PCB
[2] Circuit Board Material: Rogers 4350
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com