HMC595A Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – GaAs MMIC 3 WATT T/R SWITCH DC - 3 GHz

Outline Drawing
HMC595A / 595AE
v01.0515
GaAs MMIC 3 WATT T/R SWITCH
DC - 3 GHz
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND
Package Information
Part Number
Package Body Material
HMC595A
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC595AE
RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H595A
XXXX
595AE
XXXX
Pin Descriptions
Pin Number
Function
1, 3, 5
RF2, RF1, RFC
2
GND
4
B
6
A
Description
This pin is DC coupled and matched to 50 Ohm.
Blocking capacitors are required.
This pin must be connected to RF/DC ground.
See truth table and control voltage table.
See truth table and control voltage table.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
5
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]