HMC552LP4_11 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.6 - 3.0 GHz

Evaluation PCB
10
v03.1210
HMC552LP4 / 552LP4E
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.6 - 3.0 GHz
List of Materials for Evaluation PCB 113722 ^[1]
Item
J1 - J3
J4, J5
C1, C2, C5
C3
C4
L1
R1
U1
Description
PCB Mount SMA RF Connector
DC Pin
100 pF Chip Capacitor, 0402 Pkg.
1000 pF Chip Capacitor, 0603 Pkg.
2.2 µF Capacitor, Tantalum
18 nH Chip Inductor, 0603 Pkg.
18 Ohm Resistor, 1210 1/8 watt Pkg.
HMC552LP4 / HMC552LP4E
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
PCB ^[2]
113417 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
10 - 7
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]