HMC552LP4 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, 1.6 - 3.0 GHz

Evaluation PCB
7
v00.0306
HMC552LP4 / 552LP4E
GaAs MMIC MIXER w/ INTEGRATED
LO AMPLIFIER, 1.6 - 3.0 GHz
List of Materials for Evaluation PCB 113722 ^[1]
Item
J1 - J3
J4, J5
C1, C2, C5
C3
C4
L1
R1
U1
Description
PCB Mount SMA RF Connector
DC Pin
100 pF Chip Capacitor, 0402 Pkg.
1000 pF Chip Capacitor, 0603 Pkg.
2.2 μF Capacitor, Tantalum
18 nH Chip Inductor, 0603 Pkg.
18 Ohm Resistor, 1210 1/8 watt Pkg.
HMC552LP4 / HMC552LP4E
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of VIA holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
PCB ^[2]
113417 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
7 - 420
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com