HMC549MS8G_10 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – DUAL OUTPUT LOW NOISE AMPLIFIER, 0.04 - 0.96 GHz

7
Evaluation PCB
v02.0310
HMC549MS8G / 549MS8GE
DUAL OUTPUT LOW NOISE
AMPLIFIER, 0.04 - 0.96 GHz
List of Materials for Evaluation PCB 109236 ^[1]
Item
J1, J2
J3, J4
C1, C2
C3
C4
C5
C6
C7, C8
Description
BOMAR F Type 75 Ohm Connectors
DC Pin
18 kpF Capacitor, 0402 Pkg.
150 pF Capacitor, 0402 Pkg.
390 pF Capacitor, 0603 Pkg.
4.7 μF Capacitor, Tantalum
1,000 pF Capacitor, 0402 Pkg.
120 pF Capacitor, 0402 Pkg.
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 75 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
L1, L2
560 nH Inductor, 0603 Pkg..
R1, R2
0 Ohm Resistor, 0603 Pkg.
U1
HMC549MS8G(E) Low Noise Amplifier
U2
ETC1-1-13 l:l Balun
PCB ^[2]
109234 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: FR4
7 - 168
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]