HMC542LP4_10 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL SERIAL CONTROL ATTENUATOR, DC - 3 GHz

HMC542LP4 / 542LP4E
v03.0809
5
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
SERIAL CONTROL ATTENUATOR, DC - 3 GHz
UED _{Absolute Maximum Ratings}
TIN ^{RF Input Power (DC - 3 GHz)}
Digital Inputs (Reset, Shift Clock,
N _{Latch Enable & Serial Input)}
ISCO ^{T Bias Voltage (Vcc)}
C Channel Temperature
D ^{DU esigns Continuous Pdiss (T = 85 °C)}
(derate 7.7 mW/°C above 85 °C)
O ^{ew D Thermal Resistance}
PR ^{for N Storage Temperature}
ended ^{Operating Temperature}
+27 dBm (T = +85 °C)
-1.5 to (Vcc +1.5) V
+7V
150 °C
0.5 W
130 °C/W
-65 to +150 °C
-40 to +85 °C
Bias Voltage
Vcc (V)
+4.5
+5.0
+5.5
Idd (Typ.) (mA)
4.7
5.0
5.3
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Not ^Recomm Outline Drawing
5-7
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC542LP4
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC542LP4E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
100% matte Sn
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H542
XXXX
H542
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com