HMC542ALP4 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL SERIAL CONTROL ATTENUATOR, DC - 4 GHz

HMC542ALP4 / 542ALP4E
v05.0311
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
SERIAL CONTROL ATTENUATOR, DC - 4 GHz
8
Absolute Maximum Ratings
Bias Voltage
RF Input Power (DC - 4.0 GHz)
Digital Inputs (Reset, Shift Clock,
Latch Enable & Serial Input)
Bias Voltage (Vcc)
Channel Temperature
Continuous Pdiss (T = 85 °C)
(derate 7.7 mW/°C above 85 °C)
Thermal Resistance
Storage Temperature
Operating Temperature
+27 dBm (T = +85 °C)
-0.5 to (Vcc +0.5) V
+5.6 V
150 °C
0.5 W
130 °C/W
-65 to +150 °C
-40 to +85 °C
Vcc (V)
+4.5
+5.0
+5.5
Idd (Typ.) (mA)
4.7
5.0
5.3
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
8-7
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC542ALP4
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC542ALP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H542A
XXXX
H542A
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]