HMC460LC5 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – GaAs PHEMT MMIC LOW NOISE AMPLIFIER, DC - 20 GHz

7
Evaluation PCB
v00.1007
HMC460LC5
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, DC - 20 GHz
List of Materials for Evaluation PCB 117810 ^[1]
Item
J1 - J2
J3 - J4
C4
C2, C3
C1
C5
C6
U1
PCB ^[2]
Description
PCB Mount SMA Connector
2 mm Molex Header
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0402 Pkg.
4.7 μF Capacitor, Tantalum
0.1 uF Capacitor, 0603 Pkg.
0.01 uF Capacitor, 0603 Pkg.
HMC460LC5
117810 Evaluation PCB
The circuit board used in the final application
should use RF circuit design techniques. Signal
lines should have 50 ohm impedance while the
package ground leads and package bottom should
be connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
7 - 108
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com