HMC421QS16_10 Datasheet, PDF (7/8 Pages) Hittite Microwave Corporation – PCS/UMTS HIGH IP3 RFIC DOWNCONVERTER, 1.4 - 2.3 GHz

Evaluation PCB
9
v04.0810
HMC421QS16 / 421QS16E
PCS/UMTS HIGH IP3 RFIC
DOWNCONVERTER, 1.4 - 2.3 GHz
9-7
List of Materials for Evaluation PCB 105087 ^[1]
Item
J1 - J3
J4 - J6
C1
C2, C3, C4
C5
C6
L1
Description
PCB Mount SMA RF Connector
DC Pins
1000 pF Chip Capacitor, 0603 Pkg.
0.01 µF Chip Capacitor, 0603 Pkg.
82 pF Chip Capacitor, 0402 Pkg.
6 pF Chip Capacitor, 0603 Pkg.
150 nH Chip Inductor, 0805 Pkg.
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads should be connected directly to the ground
plane similar to that shown. A sufficient number of
via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board
shown is available from Hittite upon request.
L2
27 nH Chip Inductor, 0805
R1
6.8 Ohm Resistor, 0603
U1
HMC421QS16 / HMC421QS16E Mixer
PCB ^[2]
104814 Evaluation Board, 1.100” x 1.100”
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]