HMC775LC5_09 Datasheet, PDF (6/8 Pages) Hittite Microwave Corporation – GaAs MMIC I/Q MIXER W/ LO AMPLIFIER, 10 - 16 GHz

v01.0809
Outline Drawing
HMC775LC5
GaAs MMIC I/Q MIXER
W/ LO AMPLIFIER, 10 - 16 GHz
8
Pin Descriptions
Pin Number
1 - 4, 8 - 12,
15 - 17, 21 - 29,
31, 32
Function
N/C
5, 7, 18, 20
GND
6
LO
13
IF1
14
IF2
19
RF
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKLE
3. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND
Description
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
These pins and package bottom must
be connected to RF/DC ground.
This pin is AC coupled
and matched to 50 Ohms.
This pin is DC coupled. For applications
not requiring operation to DC, this port should be
DC blocked externally using a series capacitor whose
value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pin must not
source/sink more than 3mA of current or part non-func-
tion and possible part failure will result.
This pin is AC coupled
and matched to 50 Ohms.
Interface Schematic
30
Vdd
Power supply voltage for amplifier
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
8 - 307