HMC774LC3B_09 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC FUNDAMENTAL MIXER, 7 - 34 GHz

v00.0509
Evaluation PCB
HMC774LC3B
GaAs MMIC FUNDAMENTAL
MIXER, 7 - 34 GHz
9
List of Materials for Evaluation PCB 125042 ^[1]
Item
Description
J1 - J2
Southwest K Connector
J3
Johnson SMA Connector
U1
PCB ^[2]
HMC774LC3B Mixer
125040 Evaluation PCB
[1] Reference this number when ordering compete evaluation PCB
[2] _{Circuit Board Material: Arlon 25FR or Rogers 4350}
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
9 - 397