HMC758LP3 Datasheet, PDF (6/8 Pages) Hittite Microwave Corporation – GaAs SMT PHEMT LOW NOISE AMPLIFIER, 700 - 2200 MHz

HMC758LP3 / 758LP3E
v00.1108
GaAs SMT PHEMT LOW NOISE
AMPLIFIER, 700 - 2200 MHz
Pin Descriptions
Pin Number
1, 3 - 6,
7 - 10, 12, 14
Function
N/C
Description
No connection required. These pins may be connected
to RF/DC ground without affecting performance.
Interface Schematic
8
2
RFIN
This pin is DC coupled. An off-chip DC
blocking capacitor is required.
11
RFOUT
This pin is DC coupled. An off-chip DC
blocking capacitor is required.
This pin is used to set the DC current of the second stage
13
BIAS2
amplifier by selection of external bias resistor. See
application circuit.
15
Vdd
Power Supply Voltage for the amplifier. Bypass capacitors are
required. See application circuit.
This pin is used to set the DC current of the first
16
BIAS1
stage amplifier by selection of external bias resistor.
See application circuit.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
8 - 347