HMC734LP5 Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – MMIC VCO w/ DIVIDE-BY-4 8.6 - 10.2 GHz

v03.0609
Evaluation PCB
HMC734LP5 / 734LP5E
MMIC VCO w/ DIVIDE-BY-4
8.6 - 10.2 GHz
12
List of Materials for Evaluation PCB 110227 ^[1]
Item
Description
J1 - J4
PCB Mount SMA RF Connector
J5 - J6
2 mm DC Header
C1 - C3
100 pF Capacitor, 0402 Pkg.
C4
1,000 pF Capacitor, 0402 Pkg.
C5 - C7
2.2 μF Tantalum Capacitor
U1
HMC734LP5(E) VCO
PCB ^[2]
110225 Eval Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and backside ground paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[2] Circuit Board Material: Rogers 4350 or Arlon 25FR
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
12 - 213