HMC712LP3CE Datasheet, PDF (6/8 Pages) Hittite Microwave Corporation – GaAs MMIC VOLTAGE-VARIABLE ATTENUATOR, 5 - 26.5 GHz

v01.0309
Outline Drawing
HMC712LP3CE
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 26.5 GHz
5
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.05mm MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
HMC712LP3CE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
MSL Rating
MSL1 ^[2]
Package Marking ^[1]
H712
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
5 - 215