HMC676LP3E_1109 Datasheet, PDF (6/10 Pages) Hittite Microwave Corporation – 10 GHz LATCHED COMPARATOR WITH RSECL OUTPUT STAGE

v01.0811
HMC676LP3E
10 GHz LATCHED COMPARATOR
WITH RSECL OUTPUT STAGE
Absolute Maximum Ratings
Input Supply Voltage (Vcci to GND)
Output Supply Voltage (Vcco to GND)
Positive Supply Voltage Differential
(Vcci - Vcco)
Input Voltage
Differential Input Voltage
Input Voltage, Latch Enable
Applied Voltage (HYS)
Maximum Input Current
Output Current
Storage Temperature
Junction Temperature
Continuous Pdiss (T = 85 °C)
(Derate 43.5 mW/°C above 85 °C)
Thermal Resistance (Rth) (Junction to Lead)
Operating Temperature
ESD Sensitivity (HBM)
-0.5 V to +4 V
-0.5 V to +4 V
-0.5 V to +3.3 V
-2 V to +2 V
-2 V to +2 V
-0.5 V to Vcci +0.5 V
Vee to GND
±1 mA
40 mA
-65 °C to +150 °C
125 °C
1.74 W
23 °C/W
-40 °C to +85 °C
Class 1A
1
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN.
8. PADDLE MUST BE SOLDERED TO Vee.
Package Information
Part Number
Package Body Material
Lead Finish
HMC676LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
Package Marking ^[2]
H676
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
1-6