HMC641LP4E Datasheet, PDF (6/6 Pages) Hittite Microwave Corporation – GaAs MMIC SP4T NON-REFLECTIVE SWITCH, DC - 20 GHz

Evaluation PCB
v01.0910
HMC641LP4E
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 20 GHz
11
List of Materials for Evaluation PCB 126511 ^[1]
Item
Description
J1 - J5
PCB Mount SMA Connector
J6 - J9
DC Pin
C1
1000 pF Capacitor, 0402 Pkg.
U1
HMC641LP4E Switch
PCB ^[2]
126508 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon FR4
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be
connected directly to the ground plane similar to
that shown. A sufficient number of via holes should
be used to connect the top and bottom ground
planes. The evaluation board should be mounted
to an appropriate heat sink. The evaluation circuit
board shown is available from Hittite upon request.
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: [phone] Fax: [phone] Order On-line at www.hittite.com
Application Support: Phone: [phone] or [e-mail]
11 - 6