HMC596LP4 Datasheet, PDF (6/8 Pages) Hittite Microwave Corporation – SMT CMOS 4x2 SWITCH MATRIX, 0.2 - 3.0 GHz

v00.0107
HMC596LP4 / HMC596LP4E
SMT CMOS 4x2 SWITCH
MATRIX, 0.2 - 3.0 GHz
Absolute Maximum Ratings
Bias Voltage Range (Vdd)
Control Voltage Range
(All Logic Lines)
Channel Temperature
Thermal Resistance
Storage Temperature
Operating Temperature
Maximum Input Power (Each Input)
+8.0 Vdc
Vdd +0.5 to -0.2V Vdc
150 °C
325 °C/W
-65 to +150 °C
-40 to +85 °C
+23 dBm (200 - 2150 MHz)
Outline Drawing
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
9
NOTES:
1. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.05mm MAX.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL NC LEADS, GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC596LP4
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC596LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
MSL Rating
MSL1 ^[1]
MSL1 ^[2]
Package Marking ^[3]
H596
XXXX
H596
XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: [phone] Fax: [phone]
Order On-line at www.hittite.com
9 - 363